WATER DISTILLER & DEIONIZER
WATER DISTILLER
Brand / Model : HmbG / WS-4L |
|
-
The HmbG water still is a simple glass water still with 3kW chromium plated heater.
-
Designed to give a reliable performance and has an output of 4 liters per hour of high quality distilled water.
-
Build in PTFE drain stopcock allow easy cleaning with this design.
- A thermostatic cut-out has benn incorporated in it's design.
-
The robust metal stand is easily installed and can be wall or bench mounted.
- Brand : HmbG
|
WATER DEIONIZER
Brand : TKA |
|
-
Compact design for small volumes.
-
Plastic ion exchange systems.
-
These systems provide completely demineralized water of the same quality as is provided by the larger systems.
-
Ideal for small laboratories but also for supplying autoclaves and washers in doctors' and dentists' practices.
-
TKA DI 425 - Pressureless plastic system consisting of a practical disposable cartridge, an
analog conductivity meter, a hose set
and a wall mount. Excellently suited
for the preparation of small volumes
of water to fulfill daily requirements
of up to 10 litres
-
TKA DI 750 - Compact pressureless plastic cartridge complete with analog conductivity
meter and hose set. Water flows from
bottom to top for particularly economical optimal utilization! Ideal for daily
requirements of up to 50 litres.
-
Environmentally friendly - as the resins have long service lives and are almost unlimitedly often regeneratable
- Brand : TKA, Germany
|
Model |
Flow Rate |
Purified Water Quality |
Dimensions (Dia. x H) |
Weight |
TKA DI 425 |
50 Liter/ hour |
0.1 – 20 μS/cm |
100 x 600 mm |
3 kg |
TKA DI 750 |
100 Liter/ hour |
0.1 – 20 μS/cm |
175 x 480 mm |
7 kg |
ULTRAPURE WATER SYSTEM
Brand / Model : Sartorius / Arium Mini Plus |
|
-
Compact ultrapure water system which is specially designed for requirements of less than 10 liters per day.
-
The arium® mini plus, is directly connected to a feed water tap. The feed water is treated by a special designed pre-treatment cartridge, which consists of a combination of activated carbon and a reverse osmosis module.
- Simple Bag exchange in less than 5 minutes
- No use of cleaning agents needed
-
Optimized purity, due to closed system, avoiding a permanent biofilm
-
Intuitive menu navigation with high quality glass touch-display, developed through customer survey
-
Produce ASTM Type 1 ultrapure (18.2 MOhm) / Type 3 pure water (8 l/h)
- Organic reduction down to < 5 ppb TOC*
- Microorganism content < 1 CFU/1,000 ml
- Small Footprint, only 28 cm width
- Volume dispense from 50 ml
- Delivers a flow rate of 1 liter per minute
- Brand : Sartorius, Germany
|
RESIN FOR WATER DEIONIZER
Brand / Model : Elga / MINI/S |
|
- Standard ion exchange resin for your water deionizer.
-
Analog conductivity meter that show us the right water values (0.1 –20 μS/cm). When this value is in red zone (from 20 μS/cm) resin must be changed.
- The resin is safe, disposable and easy to install.
-
1 pack (1.9 kg) of resin is good for 1 full refill of the TKA DI 425 Water Deionizer.
- Packing : 1.9 kg/pack
- Brand : Elga, UK
|
© 2008 A.R. ALATAN SAINS (K) SDN. BHD.