A.R. ALATAN SAINS (K) SDN. BHD.

subglobal1 link | subglobal1 link | subglobal1 link | subglobal1 link | subglobal1 link | subglobal1 link | subglobal1 link
subglobal2 link | subglobal2 link | subglobal2 link | subglobal2 link | subglobal2 link | subglobal2 link | subglobal2 link
subglobal3 link | subglobal3 link | subglobal3 link | subglobal3 link | subglobal3 link | subglobal3 link | subglobal3 link
subglobal4 link | subglobal4 link | subglobal4 link | subglobal4 link | subglobal4 link | subglobal4 link | subglobal4 link
subglobal5 link | subglobal5 link | subglobal5 link | subglobal5 link | subglobal5 link | subglobal5 link | subglobal5 link
subglobal6 link | subglobal6 link | subglobal6 link | subglobal6 link | subglobal6 link | subglobal6 link | subglobal6 link
subglobal7 link | subglobal7 link | subglobal7 link | subglobal7 link | subglobal7 link | subglobal7 link | subglobal7 link
subglobal8 link | subglobal8 link | subglobal8 link | subglobal8 link | subglobal8 link | subglobal8 link | subglobal8 link

CONDUCTIVITY/TDS METERS

 

TDS TESTER & EC TESTER
Brand : Hanna

  • DiST’s are rugged and reliable pocket-sized testers that offer quick and accurate readings of conductivity or TDS.
  • This tester features an amperometric graphite electrode that provides better repeatability in measurements since they do not oxidize.
  • An amperometric measurement of EC is based on Ohm’s Law, I = V/R where R depends on the distance between two pins and their surface.
  • Oxidation changes both the distance and surface which will affect accuracy.
  • The DiST’s non-oxidizing graphite pins are able to provide an optimal surface for accurate, dependable results.
  • When calibration is necessary, simply submerge the electrode tip into calibration solution and adjust the trimmer on the side of the tester.
  • The DiST® family of testers is widely used for monitoring EC/TDS in drinking water, water conditioning, reverse osmosis, cooling towers, wastewater, laboratories, agriculture, aquaculture and aquariums, hydroponics and the printing industry
  • HI 98301 / HI 98302 / HI 98303 / HI 98304 are supplied with protective cap, screwdriver, batteries and instructions.
  • TDS Factor (HI 98301 & HI 98302) : 0.5
  • Brand : Hanna, Romania

Model
Range
Resolution
Accuracy
HANNA HI 98301 (DiST 1)
1999 ppm (mg/L)
1 ppm (mg/L)
± 2% F.S.
HANNA HI 98302 (DiST 2)
10.00 ppt (g/L)
0.01 ppt (g/L)
± 2% F.S.
HANNA HI 98303 (DiST 3)
1999 µS/cm
1 µS/cm
± 2% F.S.
HANNA HI 98304 (DiST 4)
19.99 mS/cm
0.01 mS/cm
± 2% F.S.

 

 

 

EC/TDS/TEMPERATURE TESTER
Brand : Hanna

HANNA,HI 98311,HI 98312

  • When the original DiST® (Dissolved Solids Tester) was first introduced, conductivity and total dissolved solids measurements became easy and affordable.
  • The DiST's ease of use, in combination with its affordability made it the standard in EC and TDS measurement.
  • This tester includes features such as: a replaceable graphite electrode, adjustable TDS ratio, °C or °F measurement, Automatic Temperature Compensation (ATC) with adjustable β, battery level indicator, stability indicator, automatic shut-off and automatic calibration.
  • The graphite conductivity electrode provides greater accuracy because it resists contamination by salt deposits in the sample.
  • All of these features are packed in a floating, waterproof casing. This 3-in-1 tester is unmatched in EC/TDS/ temperature measurements.
  • HI 98311 / HI 98312 are supplied with HI 73311 EC/TDS probe, HI 73128 probe removal tool, batteries and instructions.
  • TDS Factor (HI 98311 & HI 98312) : Adjustable from 0.45 to 1.00
  • Brand : Hanna, Romania

Model
Range
Resolution
Accuracy
HANNA HI 98311 (DiST 5)
EC
:
0 to 3999 µS/cm
1 µS/cm
± 2% F.S.
TDS
:
0 to 2000 ppm
1 ppm
± 2% F.S.
Temperature
:
0.0 to 60.0°C
0.1°C
± 0.5°C
HANNA HI 98312 (DiST 6)
EC
:
0.00 to 20.00 mS/cm
0.01 mS/cm
± 2% F.S.
TDS
:
0.00 to 10.00 ppt
0.01 ppt
± 2% F.S.
Temperature
:
0.0 to 60.0°C
0.1°C
± 0.5°C

 

 

 

DIRECT SOIL EC TESTER
Brand / Product Code : Hanna / HI 98331

  • The HI 98331 Soil Test™ is a pocket tester specifically designed to directly measure soil conductivity and temperature.
  • With a temperature sensor in the penetration probe, measurements are automatically temperature compensated.
  • The conductivity range can be calibrated at one point and is designed to be performed in a standardized solution
  • Replaceable 122 mm (4.5”) penetration probe
  • HI 98331 (Soil Test™) is supplied with HI 73331 penetration conductivity probe, calibration screwdriver, batteries and instructions..
  • Conductivity Range / Resolution : 0.00 to 4.00 mS/cm (dS/m) / 0.01 mS/cm
  • Temperature Range / Resolution : 0.0 to 50.0°C / 0.1°C
  • Conductivity Accuracy : ± 0.05 mS/cm (0.00 to 2.00 mS/cm), ± 0.30 mS/cm (2.00 to 4.00 mS/cm)
  • Temperature Accuracy : ± 1°C
  • Brand : Hanna, Romania

 

 

 

PH/EC/TDS/TEMPERATURE TESTER
Brand : Hanna

  • HI 98129 & HI 98130 are waterproof tester that offers high accuracy pH, EC/TDS and temperature measurements in a single tester! No more switching between meters for your routine measurements.
  • This floating, waterproof combination tester has an easy to read, LCD and an automatic shut-off. pH and EC/TDS readings are automatically temperature compensated.
  • This tester features a replaceable pH electrode cartridge with an extendable cloth junction as well as an EC/TDS graphite electrode.
  • The extendable cloth junction provides an extended electrode life and the replaceable pH cartridge means that this tester does not need to be thrown away when the pH sensor is exhausted.
  • The EC/TDS conversion factor is user selectable as well as the temperature compensation coefficient (β).
  • Fast, efficient, accurate and portable, the Combo pH, EC/TDS and temperature tester combines all the features users have requested and more!
  • TDS Factor (HI 98129 & HI 98130) : Adjustable from 0.45 to 1.00
  • Brand : Hanna, Romania

Model
Range
Resolution
Accuracy
HANNA HI 98129
pH
:
0.00 to 14.00 pH
0.01 pH
± 0.05 pH
EC
:
0 to 3999 µS/cm
1 µS/cm
± 2% F.S.
TDS
:
0 to 2000 ppm
1 ppm
± 2% F.S.
Temperature
:
0.0 to 60.0°C
0.1°C
± 0.5°C
HANNA HI 98130
pH
:
0.00 to 14.00 pH
0.01 pH
± 0.05 pH
EC
:
0.00 to 20.00 mS/cm
0.01 mS/cm
± 2% F.S.
TDS
:
0.00 to 10.00 ppt
0.01 ppt
± 2% F.S.
Temperature
:
0.0 to 60.0°C
0.1°C
± 0.5°C

 

 

 

© 2008 A.R. ALATAN SAINS (K) SDN. BHD.

000webhost logo